| E-Z
Access® Crawlspace doors may be installed in both wood framing or
concrete block.
Access Doors
Plastic access doors that replace-decayed or
rotted doors or rusted out steel doors. Which could cause fungus
problems if left unchecked This is a trim and fit. Measure your door
first & then check the size of this access door below. It trims out
to fit almost all standard access door openings.
Dimensions - Click Here
FREE
SHIPPING
$113.00
each |
 |
On most homes the Total Charge for installation and materials - $225.00
The approximate outside
dimensions of the crawl space door frame are 29" tall and 42"
wide, and may be installed full size if space allows. However, if space is
limited, the frame may be cut to size using standard tools (skill saw,
jigsaw). The frame is designed to be trimmed side to side and from the
top.
The minimum size to which the frame can be trimmed is 29" wide x
23" tall.
When securing doorframe to
house structure, wood screws or tap con type concrete screws may be used.
Space screws a maximum of 12" apart and pre-drill holes in frame
slightly larger than the diameter of the fasteners to be used.
Note: Special size drill bit will be required for concrete screws.
Because the door is
recessed, a minimum structural opening of 21" tall x 27" wide is
required. If this opening does not exist, 1x2's or 1x4's can be secured to
the structure and the doorframe can be secured to these.
Although the plastic
contains some UV protection, painting may increase the level of
protection. Either latex or oil base paints (most brands of spray cans) is
acceptable with oil base paints being more durable.
|
Features
|
| Material:
Plastic |
Color:
White |
|
| •
Weather stripped |
•
Keyed Lock |
•
Can Be Painted |
Go
here for Bath Trap Doors |
![visa[1].gif (1920 bytes)](visa[1].gif){kind=small}
![mc[1].gif (2076 bytes)](mc[1].gif){kind=small}
