|
newbar
|
|
The
S/H charges for Power Sprayers are listed as the last page link below.
S/H charges for PVC pipes, Lead, Brass Quick Connects, and other
fittings will be
added after you place your order. Plastic pipes weigh only a few ounces,
but brass can become several
pounds very quickly. Therefore, we decided it
would be best to simply wait and see what each shopper orders first and
then we could give a better
shipping cost. Some states do charge a tax in their state. They are Alabama,
Arkansas, Florida, Georgia, Kentucky, Louisiana, Missouri, Mississippi
and S. Carolina. |
12 VOLT PUMP UNITS
COMPLETE PUMP UNITS
LAWN
SPRAYERS
WOOD PROTECTION SYSTEMS
ACCESSORIES
FOAMING
MACHINE
QUICK
CONNECT SOCKETS
VALUES/GAUGES/COUPLINGS
FITTINGS
FOGGERS
HAND (Compression) SPRAYERS
HOSE/REEL/PUMPS
SHIPPING
RATES POWER SPRAYER
|
For
the accuracy of your order to be complete. We must have
confirmation by email, fax or the normal process of you placing
your order through e-commerce. Equipment orders will not be
taken by phone without final confirmation by one of the 3
options above. We will gladly talk to you by phone about any
questions you may have but no quotes will be given by phone. If
we don't offer what your wanting within these pages, it would be
best to email or fax what your wanting for a quote. This way, we
both have a written confirmation and fewer mistakes will occur.
|
|
|
. |
|
|
|
Asking
for changes in our Power Sprayers will delay your order for up
to 3 weeks. If you order from the website, your order will be at
your front door as early as 7 days but rarely past 2 weeks.
Except, during the busy season Jan.15th / June 30th. Expect
normal production delays during the busy season. |
- We
will change the Surflo Elec.Pump from the 1.8 to the 3.6 gpm./
$70.00 additional charge.
- For those that need to
know it. The 1.8 or 3.6 Surflo Pump will produce 30 to 40 PSI at the
tip. We do
not install gauges on these units. You can adjust your PSI to a
lower volume with the ball valves but you cannot gauge it for
accuracy. Only complete Spray Rigs have gauges and etc.
|
|
Complete 12 volt Pumping
System, pre-tested & ready for operation |
|
· Hannay
reel with 150 feet of 1/2" PVC hose.
· Shurflo
3.6 GPM pump (produces approximately 2.5 GPM at tip).
·
All Aluminum Frame
· Spraying
Systems #36 gunjet with 4 interchangeable tips
(4" void tip, 18" treating rod, fan spray wand, and adjustable conejet wand).
|
| 50
GAL |
$1550.00 |
 |
|
(24"
wide by 53" long by 24" tall) |
|
OPTION
2
for
| 50
GALLON LFH - 3.6 GPM |
610-2000-50-LP-H
|
|
|
|
Complete
Pumping System, pre-tested & ready for
operation
|
|
·
Hannay
reel with 200 feet of 1/2" PVC hose
with an additional 100' of hose for
extending your distance with all quick
connect fittings included.
·
12
Volt Shurflo pump. 3.6 GPM
(produces
approximately 2.5 GPM at tip).
·
Robco
5 in 1 Termite Tool
|
Click to enlarge |
- Robco QCG gun.
- 11/16 by 39" soil rod with 1
tip.
- .405 by 12" and .405 by 39"
slab rods with 3 tips.
- Splash guard.
- Foot ram with cone seal.
- Adjustable side handle.
- Conejet attachment.
|
|
·
All Aluminum Frame.
|
50
GALLON LFH - 3.6 GPM
610-2000-50-LP-H |
$2190.00 |
|
|
|
|
|
|
|
|
ADJUSTABLE CONEJET
WAND WITH TIP
|
 |
|
$26.85
|
|
|
|
|
|
Complete 12 volt Pumping
System, pre-tested & ready for operation |
|
· Hannay
reel with 150 feet of 1/2" PVC hose.
· Shurflo
3.6 GPM pump (produces approximately 2.5 GPM at tip).
·
All Aluminum Frame
· Spraying
Systems #36 gunjet with 4 interchangeable tips
(4" void tip, 18" treating rod, fan spray wand, and adjustable conejet wand).
|
| 50
GAL |
$1550.00 |
|
|
(36"
wide by 39" long by 24" tall)
OPTION
2
for
| 50
GALLON WFH - 3.6 GPM |
610-2000-50-OP-H
|
|
|
|
Complete
Pumping System, pre-tested & ready for
operation
|
|
·
Hannay
reel with 200 feet of 1/2" PVC hose
with an additional 100' of hose for
extending your distance with all quick
connect fittings included
·
12
Volt Shurflo pump. 3.6 GPM
(produces
approximately 2.5 GPM at tip).
·
Robco
5 in 1 Termite Tool
|
Click to enlarge |
- Robco QCG gun.
- 11/16 by 39" soil rod with 1
tip.
- .405 by 12" and .405 by 39"
slab rods with 3 tips.
- Splash guard.
- Foot ram with cone seal.
- Adjustable side handle.
- Conejet attachment.
|
|
·
All Aluminum Frame.
|
50
GALLON WFH - 3.6 GPM
610-2000-50-OP-H |
$2190.00 |
|
|
|
|
|
|
|
|
|
(shown with optional real guides)
| 25
GAL. TAILGATOR |
610-2000-25T |
|
Complete Pumping
System, pre-tested & ready for operation |
|
·
Low Profile
Poly Tank with 5" fillwell.
· Hannay reel
with 150 feet of 3/8" PVC hose.
· 12 Volt Shurflo
pump.
· Spraying
Systems #31 Gunjet.
With 3 wands (fan spray, adjustable conejet & fire ant
probe).
·
All Aluminum Frame |
| 25
GAL |
$1258.00 |
|
| Optional
Real Guides |
$299.00 |
|
|
(20"
wide by 48" long by 22" tall) |
OPTION
2
for
| 25
GAL. TAILGATOR |
610-2000-25T |
|
|
|
Complete
Pumping System, pre-tested & ready for
operation
|
|
·
Low
Profile Poly Tank with 5" fillwell.
·
Hannay
reel with 200 feet of 1/2" PVC hose
with an additional 100' of hose for
extending your distance with all quick
connect fittings included
·
12
Volt Shurflo pump. 3.6 GPM
·
Robco
5 in 1 Termite Tool
|
Click to enlarge |
- Robco QCG gun.
- 11/16 by 39" soil rod with 1
tip.
- .405 by 12" and .405 by 39"
slab rods with 3 tips.
- Splash guard.
- Foot ram with cone seal.
- Adjustable side handle.
- Conejet attachment.
|
|
·
All Aluminum Frame.
|
|
|
(20"
wide by 48" long by
22" tall)
|
|
| 25
GAL |
$1963.00 |
|
|
|
|
|
|
2
BY 15
2 BY 25 |
610-2000-15
S-T
610-2000-25 S-T |
|
Complete Pumping
System, pre-tested & ready for operation |
|
·
Low Profile
Poly Tank with 5" fillwell.
· Low
Profile Summit reel with 150 feet of 1/4" PVC hose.
· 12 Volt
Shurflo pump.
· Spraying
Systems #31 Gunjet.
With 3 wands (fan spray, adjustable conejet & fire ant
probe).
·
All Aluminum
Frame |
| 15
GAL |
$1354.00 |
|
|
(29"
wide by 48" long by 16½" tall) |
| 25
GAL |
$1395.00 |
|
|
|
|
(29"
wide by 52" long by 19" tall) |
|
OPTION
2
for
|
Complete
Pumping System, pre-tested & ready for
operation
|
|
·
Low
Profile Poly Tank with 5" fillwell.
·
Hannay
reel with 200 feet of 1/2" PVC hose
with an additional 100' of hose for
extending your distance with all quick
connect fittings included. Changing to a
1/2" hose will change the low profile to
be at least 4" higher (29" wide by
52"long by 23"tall).
·
12
Volt Shurflo pump. 3.6 GPM
·
Robco
5 in 1 Termite Tool
|
Click to enlarge |
- Robco QCG gun.
- 11/16 by 39" soil rod with 1
tip.
- .405 by 12" and .405 by 39"
slab rods with 3 tips.
- Splash guard.
- Foot ram with cone seal.
- Adjustable side handle.
- Conejet attachment.
|
|
|
(29"
wide by 52" long by 23"
tall)
|
| 25
GAL |
$2126.00 |
|
|
|
|
OPTION
3
|
Complete
Pumping System, pre-tested &
ready for operation
|
|
·
Low
Profile Poly Tank with 5" fillwell.
·
Includes Air Gaps
·
Hannay reel with 200 feet of 3/8" PVC hose.
·
12 Volt Shurflo pump. 3.6 GPM
·
Spraying Systems #31 Gunjet.
With 3 wands (fan spray, adjustable conejet & fire ant probe).
·
GREEN GARDE JD-9 SPRAY GUN With A Small Tip To Handle
Shurflo Pump 640-HO345
·
ALL ALUMINUM FRAME
|
|
(29"
wide by 52" long by
23" tall)
|
| 25
GAL |
$1689.00 |
|
|
|
15
GAL. ECONOMY
25 GAL. ECONOMY |
610-2000-15E
610-2000-25E |
|
Complete Pumping
System, pre-tested & ready for operation |
|
·
Low Profile
Poly Tank with 5" fillwell.
· 100
feet of 1/4" PVC hose.
· 12 Volt
Shurflo pump.
· Hypro
washerless gun with adjustable conjet wand.
|
| 15
GAL |
$488.00 |
|
|
(12"
wide by 25" long by 15½" tall) |
| 25
GAL |
$515.00 |
|
|
|
|
(20"
wide by 30" long by 18" tall) |
|
24" Wand |
$12.86 |
|
| |
(Straight) (No
Gun, No Tip) |
|
|
15
GAL. PULL-BEHIND
SPRAYER |
610-2000-15E-PORT |
|
|
|
·
Low
Profile Poly Tank with 5" fillwell
· Cart
with drop pin hitch & pneumatic wheels.
· 25
feet of 1/4" PVC hose.
· Hypro
washerless gun with adjustable conejet wand
· 12
Volt pump provides 1.25 gallons per minute at the tip.
· Detachable
flood jet tip for boom type spraying.
· Floodjet
tip for boom type spraying covers three to four foot swath.
|
| 15
GAL |
$664.00 |
|
|
(36"
wide by 39" long by 24" tall) |
|
|
|
AIR GAP BACK
FLOW PREVENTER
|
660-7001 |
-
Eliminates the possibility of chemical siphoning
into the fresh water source.
-
Required
by many local codes
-
Includes
the Air Gap Tee with bushing, tank fitting and plug
as you see it for your ordered tank.
-
If you
have broken off the Air Gap Tee and you still have
the bushing and fitting to screw onto. You can order
the Air Gap Tee by itself.
|
|
With
complete Air Gap Tee including Bushings and Fittings
$69.50
|
|
|
Air Gap Tee only with no Bushing or Fittings $62.50
|
|
|
|
|
|
|
![visa[1].gif (1920 bytes)](visa[1].gif){kind=small}
![mc[1].gif (2076 bytes)](mc[1].gif){kind=small}
