TyraTech Naturals insect spray

Put a revolutionary insect spray in your kitchen, and see what happens.

An insect spray that claims to be safe is nothing new. But a safe insecticide that kills bugs in seconds is truly revolutionary. Introducing TyraTech Naturals™, a ready-to-use spray that combines the potency of a chemical with the safety of a green insecticide.

We have created a unique contact insecticide that is safe to humans because it only targets insects. Think your kitchen is hungry for an insect spray like that? TyraTech Naturals kills on contact: Cockroaches, Flies, Ants and many more.

It Really Works!
University and independent research confirm the efficacy of this product. Test results prove TyraTech Naturals insect spray kills in less than 30 seconds. Review the performance data.

Now there's a potent, natural contact insecticide that is:
• Highly effective at killing kitchen insects.
• Safe to humans, and can be used in kitchen, bar and storage areas including floors and drains.
• Free from training requirements, specialized application or protective gear.
• Environmentally friendly and has a pleasant, clean scent.

How it Works TyraTech Naturals are a new class of products for controlling insects and parasites that offer:
• Unique killing action
• Unsurpassed safety profile
• Broad spectrum potency against insects, nematodes and parasites
• Natural active ingredients

TyraTech Naturals works by targeting 3 sensitive chemo-receptors that have a killing effect on invertebrates including insects. These receptors are not found in animals or humans. Therefore TyraTech Naturals are deadly potent to insects, but safe for humans.

WHY YOU WILL WANT TO TRY IT.
TyraTech Naturals is a new insecticide you can use safely in kitchen, bar and storage areas including floors and drains - a highly potent, green insecticide derived from natural plant sources. It acts in a manner deadly to insects but safe for humans and animals.

How can a product be both potent and safe?
Unlike many green products, TyraTech Naturals works consistently during commercial use. Our patented biotech process isolates and combines natural compounds that kill insects in seconds.

Virtually all businesses with kitchens require regular treatment by a licensed pest professional. TyraTech Naturals insect spray is an insecticide designed for daily use, replacing synthetic aerosol pesticides which are not appropriate for use around food.

Finally, a daily-use insect spray that is:
• Highly effective at killing kitchen insects.
• Safe to use in commercial kitchens.
• Free from training requirements, specialized application equipment or protective gear.
• Safe to employees, customers and the environment.
• Has a pleasant, clean scent.
• Packaged in easy-to-store cases of four 32-oz. ready-to-use bottles.

Kills on Contact

• Cockroaches • Drain flies • Fruit flies • Ants • Houseflies • Spiders • Millipedes • Mites • Bed bugs • Crickets • And many more

HOW TO USE
With TyraTech Naturals, you now have a potent, ready-to-use insecticide that is safe to use in kitchen, bar and storage
areas including floors and drains. Shake the bottle vigorously to ensure an even spray, then just aim and shoot.

Keep TyraTech Naturals handy for use as a contact insecticide:
• Shake, aim and shoot to kill common kitchen pests in less than 30 seconds.
• Knock down insects before noticed by customers, kills as fast as harsh synthetic chemicals but is safe to workers and
  patrons.

For daily insect prevention:
• Control drain flies by spraying liberally in drains each morning and night.
• Reduce flies and roaches by coating the inside of all trash bins and dumpsters.
• Use as needed to suppress offensive odors with the clean, fresh scent.

Use helps support your green initiatives.
Because TyraTech Naturals only works on insects, it makes kitchen, bar and food storage area safer places to work. You get better insect control through the ability to spray in sensitive areas — something you cannot do with most synthetic aerosol insecticides without fearing penalties from health inspectors. And on top of that, your employees will feel safer and more environmentally responsible

VIPER Insecticide Concentrate

Provides Effective Insect Control

Use Areas: Houses, Warehouses, Industrial Buildings, Apartment Buildings & Other Industrial and Commercial areas.

Contains: 25.4% Cypermethrin 

DIRECTIONS FOR USE 
For residual pest control in and on buildings and structures and their immediate surroundings and on modes of transport. Permitted areas of use include industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses (non-commercial), and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (cargo areas only), schools, nursing homes, hospitals (nonpatient areas), restaurants, hotels and food manufacturing, processing, and servicing establishments. Let treated surfaces/areas dry before allowing humans and pets to contact treated surface/areas. Do not use in commercial greenhouses or nurseries. Not for use on plants being grown for sale or other commercial use, or for commercial seed production, or for research purposes.

Do not use on food or feed crops.

Martin's Viper E.C. Insecticide is intended for dilution with water for spray application. Fill sprayer with the desired volume of water and add Martin's Viper E.C. Insecticide. Close and shake before use in order to ensure proper mixing. Shake or reagitate sprayer before use if spraying is interrupted. Make up only as required; repeat treatments when needed.

Cockroaches, Spiders, Crickets, Scorpions, Silverfish, Ticks, and Firebrats: Apply as a coarse, lowpressure
spray to areas where these pests hide, such as baseboards, corners, storage areas, closets, around
water pipes, doors and windows, attics and eaves, behind and under refrigerators, cabinets, sinks, furnaces
and stoves, the underside of shelves, drawers, and similar areas. Pay particular attention to cracks and
crevices; also see “OUTSIDE SURFACES AND AROUND BUILDINGS.”
Ants: Apply to any trails, around doors and windows, and similar areas where ants may be found. Refer to
“BARRIER TREATMENT” directions to prevent infestation; also see “OUTSIDE SURFACES AND
AROUND BUILDINGS.”
Wasps and Bees: Application to nests should be made late in evening when insects are at rest. Thoroughly
spray nest and entrance and surrounding areas where insects alight; also see “OUTSIDE SURFACES AND
AROUND BUILDINGS.”
Boxelder Bugs, Sowbugs, Pillbugs, Millipedes, Elm Leaf Beetle, and Centipedes: Apply around doors
and windows and similar areas where these pests may be found or where they may enter premises. Spray
baseboards, storage areas, and other locations. Refer to “BARRIER TREATMENT” directions to prevent
infestation; also see “OUTSIDE SURFACES AND AROUND BUILDINGS
Flies: Apply directly to walls, ceilings, window screens, and other fly resting areas as a residual surface
treatment. May be used inside residential buildings as well as in and around carports, garages, and storage
sheds; also see “OUTSIDE SURFACES AND AROUND BUILDINGS.”
Scorpions: Treat and remove accumulations of lumber, firewood, and other materials which serve as
harborage sites. Apply as a coarse spray to the point of drip; also see “OUTSIDE SURFACES AND
AROUND BUILDINGS.”
Control of Wood Infesting Beetles: To control wood infesting insects, such as powderpost beetle
(Lyctidae), false powderpost beetles (Bostrichidae), deathwatch beetles (Anobiidae), old house borers
(Cerambycidae), and ambrosia beetles (Scolytidae), in homes and other structures, apply as an emulsion
containing 0.2% Martin’s Viper E.C. Insecticide. For treatment of small areas, apply by brushing the
emulsion evenly on wood surfaces. For large or overhead areas, apply as a coarse spray but do not let runoff
occur. When spraying overhead interior areas of homes, apartment buildings, etc., spray to the point of
runoff, cover all surfaces below the area being sprayed with plastic sheeting or other material which could be
disposed of by placing in trash if contamination from dripping occurs. Sprayed surfaces should be avoided
until spray has totally dried. Do not use in structures occupied by animals to be used for food purposes or
which produce products for human consumption.
Food-Handling Establishments: Places other than private residences in which food is held, processed,
prepared, or served:
Nonfood/Feed Areas: Martin’s Viper E.C. Insecticide may be used as a general, spot, or crack and crevice
treatment in nonfood/feed areas. Similar areas where insects hide or through which insects may enter should
be treated. Examples of nonfood areas include garbage rooms, lavatories, floor drains (to sewers), entries and
vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after
canning or bottling).
Food Areas: Martin’s Viper E.C. Insecticide is not labeled for use in food areas. Do not use in food areas of
food-handling establishments, restaurants, or other areas where food is commercially prepared or processed.
Do not use in serving areas while food is exposed or facility is in operation. Serving areas are areas where
prepared foods are served, such as dining rooms, but excluding areas where foods may be prepared or held.
In the home, all food-processing surfaces and utensils should be covered during treatment or thoroughly
washed before use. Exposed food should be covered or removed. Examples of food areas are for receiving,
storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage, and enclosed
processing systems (mills, dairies, edible oils, syrups). Serving areas (when food is exposed and facility is in
operation) also would be considered a food area.
OUTSIDE SURFACES AND AROUND BUILDINGS
Apply Martin’s Viper E.C. Insecticide using a 0.1% emulsion as a residual treatment to outside surfaces of
buildings including, but not limited to, exterior siding, foundations, porches, window frames, eaves, patios,
garages, and other similar areas. Also may be used on lawns and ornamentals in landscaped areas around
private homes, duplexes, townhouses, condominiums, house trailers, apartment complexes, carports, garages,
fence lines, storage sheds, barns, and other residential structures and commercial, industrial, institutional, and
public buildings. Treatment may also be made to soil, trunks of woody ornamentals, and other similar areas
where pests congregate or are active.
When making an application to vinyl siding, treat a small area and allow to dry. Some types of vinyl siding,
particularly if aged or weathered, may show some staining after application of an emulsifiable concentrate
product.
Barrier Treatment (except cockroaches): Apply 0.1% to a band of soil and vegetation 6 to 10 feet wide
around and adjacent to the structure. Also, treat the foundation of the structure to a height of 2 to 3 feet. Use
treatment volume of 2 to 10 gallons per 1,000 square feet. Higher volumes of water may be needed if mulch
or leaf litter is present or dense foliage. House siding may be treated if boxelder bugs, elm leaf beetles,
earwigs or silverfish, or other similar pests are present.
Treatment of Preconstruction Lumber and Logs*:
PRE-CONSTRUCTION TREATMENT: DO NOT APPLY AT A LOWER DOSAGE AND/OR
CONCENTRATION THAN SPECIFIED ON THIS LABEL FOR APPLICATIONS PRIOR TO
INSTALLATION OF THE FINISHED GRADE.
To protect unseasoned lumber and logs from wood-destroying insects, such as termites, carpenter ants, and
beetles (ambrosia, powder-post, old house borers, and others), totally treat wood with a 0.25% to 0.5%
solution of Martin’s Viper E.C. Insecticide. This solution can be applied by various methods, including
spraying, brushing, dipping, and pressure treatment. Frequent monitoring of dip and pressure systems are
necessary to ensure that the desired level of Martin’s Viper E.C. Insecticide is maintained. Wood can be
handled after treatment when dry.

1. For dip treatments, the wood should be totally submersed in the solution until thoroughly wet and
   then allowed to dry in a suitable location. Dipping solutions to which Martin’s Viper E.C.
   Insecticide has been added should be agitated before use if left unused for long periods of time.
   Sediment, debris, and other deposits should be periodically cleaned from the tank.

2. For pressure treatments, the wood should be placed in the treatment chamber, the Martin’s Viper
   E.C. Insecticide solution added, and the system pressurized up to 250 psi for up to 1 hour, depending
   on the density and type of wood treated. After the pressure is released and the system drained, the
   wood should be placed in a suitable location for drying.

3. For spray treatments, the wood should be sprayed thoroughly, including back and ends.

4. For brush treatments, all parts of wood surfaces should be thoroughly treated.

Note: Do not use water-based sprays of Martin’s Viper E.C. Insecticide in conduits, motor housings, junction
boxes, switch boxes, or other electrical equipment because of possible shock hazard. Let surfaces dry before
allowing children and pets to contact surfaces. Protect aquariums from spray mist. For best results,
thoroughly wash out sprayer and screen with water and detergent before using Martin’s Viper E.C.
Insecticide. Do not use this product with oil.
Do not apply this product to edible crops.
During any application to overhead interior areas of structure, cover surface below with plastic shielding or
similar material.
Do not use as a space spray.
Use only in well-ventilated areas.
Do not apply this product in any room being used as living, eating, sleeping, or recovery area by patients, the
elderly, or infirm when they are in the room.
Do not apply to classrooms when in use.
Do not apply to institutions (including libraries, sports facilities, etc.) in the immediate area when occupants
are present.
Do not use in warehouses where raw or cured tobacco is stored.
Do not use in warehouses where raw agricultural commodities for food or feed are being stored.
Do not use in aircraft cabins.

These two products below are Companion Items for Viper and Suspend
Industrial Quality Sprayer - 1 Gallon Capacity with Viton Seals and replaceable parts. 40" Reinforced Chemical Resistant Hose, Plastic Valve with Viton Seals. Brass Extension with Pin to Cone and Fan Spray Tip.	Sprayer 1-pb Industrial 1-gallon Manufacturer: B&G Equipment Cost $52.00 FREE SHIPPING

Gentrol® IGR Concentrate Target Pests = Bed bugs, cockroaches, stored product pests and fruit & drain flies. Contains the Insect Growth Regulator (S)-Hydroprene, which disrupts pests' normal growth pattern. Labeled for use as a spot and crack-and-crevice treatment in all areas of food handling establishments. May be applied as a general fogging agent or general surface spray. Long-term control — 120 days. Breaks the endless clean-out/reinfestation cycle. How It Works Gentrol® IGR Concentrate travels deep into wall cavities, cracks and crevices, reaching the pests that other treatments miss. (S)-Hydroprene, the active ingredient, prevents pest larvae from progressing to the adult stage either causing sterility of adults or preventing the emergence of insects from the pupal stage — preventing future infestations. Stored product pests encounter (S)-Hydroprene the same way they encounter insecticides — contacting a treated surface.

Not for sale in AK, NY Gentrol 1 bottle, 1oz. Cost $14.50 each 10 bottles, 1oz. Cost $62.24 case FREE SHIPPING Downloads:

Application Sites Whether it's used for fogging agent or general surface spray, the long-term control of Gentrol IGR Concentrate is ideal for these sites: Warehouses, hotels, motels, dormitories Food Handling Establishments Schools Hospitals Nursing Homes Aircraft, Ships, Trains, Trucks See the Gentrol IGR Concentrate label for a complete list of application sites Available in 1 oz. vials. Active Ingredient: (S)-Hydroprene (CAS #65733-18-8) . . . . . . . . 9%   Target pests: Roaches, drain and fruit flies, Bedbugs, and stored product pest populations.   For use in: Food and non-food areas   Application: mix vial with one gallon of water and use as crack and crevice, spot, or fogging application. Most effective when mixed with a liquid insecticide. Yield: For roaches repeat every 4 months. For Bed bugs repeat every 2 weeks. For fruit and drain flies repeat every 2-4 weeks. NOT FOR SALE AK

Gentrol Point Source®
Target Pests = Cockroaches, stored product pests

• All the benefits of an Insect Growth Regulator (IGR) in a discreet, non-spray formulation.

• Contains the Insect Growth Regulator (S)-Hydroprene for 90-day control of stored product pests.

• Pests don't need to come in contact with the device to be affected.

• Ideal for food handling establishments and other sensitive accounts.

• No need to vacate areas during treatment.

How It Works
Activating Gentrol Point Source® is as simple as squeezing the raised end of the plastic, adhesive-back device. This releases Gentrol IGR onto a filter paper. From there, it moves up to 75 square feet. That way, pests never need to come in contact with the device. (S)-Hydroprene, the active ingredient, prevents pest larvae from progressing to the adult stage either causing sterility of adults or preventing the emergence of insects from the pupal stage — preventing future infestations.

Application Sites
The discreet delivery system of Gentrol Point Source is ideal for sensitive accounts like these:

• Food Handling Establishments

• Hospitals

• Nursing Homes

• Areas Where Spraying Isn't Acceptable (e.g., Electrical Boxes and Computer Equipment)

• See the Gentrol Point Source label for a complete list of application sites click to enlarge

• MSDS  / Specimen Label

 

20 devices per box. $45.75 per box FREE SHIPPING